|
Size: 3847
Comment:
|
Size: 4909
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 5: | Line 5: |
| = Balls and Plate , 4A30.22 = | = Balls and Plate, 4A30.22 = |
| Line 8: | Line 8: |
| Thermal Properties of Matter, [[ThermalProperties#SolidExpansion|4A30. Solid Expansion]] | . Thermal Properties of Matter, [[ThermalProperties#SolidExpansion|4A30. Solid Expansion]] |
| Line 20: | Line 20: |
| A plate with a hole is heated with a set of two balls, one over and one under size. Heat the plate and slip over both. ||<40% style="text-align:center">'''Equipment''' ||<30% style="text-align:center">'''Location''' ||<25% style="text-align:center">'''ID Number''' || || || || || |
A plate with a hole is heated with a set of two balls, one over and one under size. Heat the plate and slip over both. ||<40% style="text-align:center">'''Equipment''' ||<30% style="text-align:center">'''Location''' ||<25% style="text-align:center">'''ID Number''' || || || || || |
| Line 25: | Line 23: |
| ||Two metal balls attached to a rod||[[ThermoCabinetBayA3|TD, A3, Shelf #1]] ||<style="text-align:center">4A30.22 || | ||Two metal balls attached to a rod ||[[ThermoCabinetBayA3|TD, A3, Shelf #1]] ||<style="text-align:center">4A30.22 || |
| Line 29: | Line 27: |
| ||[[RedWhiteGasCart| red and white gas carts]]||Rooms 2103, 2241, (and 2223 upon request) || || | ||[[RedWhiteGasCart|Red and white gas carts]] ||Rooms 2103, 2241, (and 2223 upon request) || || |
| Line 35: | Line 34: |
| * This demonstration requires a supply of methane gas usually provided by the [[RedWhiteGasCart| red and white gas carts]] found in rooms 2103, 2241, (and 2223 upon request). | * This demonstration requires a supply of methane gas usually provided by the [[RedWhiteGasCart|red and white gas carts]] found in rooms 2103, 2241, (and 2223 upon request). * This demonstration requires a supply of liquid nitrogen. The main supply is located at the loading dock. If 12 hours notice given to lecture demo, supply will be provided. |
| Line 39: | Line 39: |
| 1. Make sure you have the balls with two sizes, one is over and one is under the hole size, the brass plate with hole in the middle, and the stand. 1. Have the liquid nitrogen in the holder. Option A. Shrink or extended ball |
1. To light the burner, connect the attached gas hose to the gas out (red panel) on the [[RedWhiteGasCart|red and white gas cart]]. 1. Open the gas valve. 1. Light a match and bring it near the top of the burner. 1. The flame will ignite the gas. Adjust the flame height accordingly by adjusting the valve. Option A. Shrinking and expanding the balls 1. Show that the smaller ball can get through the hole and the larger ball cannot. 1. Heat the smaller ball with the burner and show that the smaller ball can no longer fit through the hole. 1. Soak the larger ball in the liquid nitrogen and show that the larger ball can now fit through the hole. Option B. Expanding the hole |
| Line 42: | Line 53: |
| 1. Heat the smaller ball or put the larger ball in the liquid nitrogen, this will make the opposite situation from the previous. Option B. Extended Hole 1. Demonstrate to students that the smaller ball can get through the hole and the larger ball cannot. 1. Heat the ball by the burner until you sure that the hole get larger than before. 1. Demonstrate to students again, this time both balls should get through the hole. |
1. Place the burner beneath the plate to heat it. 1. Show that both balls now fit through the hole. |
| Line 49: | Line 58: |
| * Always use the gloves and safety glasses throughout this demonstration. | |
| Line 50: | Line 60: |
| * Use care when working with the liquid nitrogen - prolonged contact with skin causes severe frostbite! | |
| Line 53: | Line 64: |
| When the plate is heated, it expands the hole in the middle of the plate. [The molecular bonds are lengthened, when the material expands. Try to think in this way, a group of people standing in a tight circle with elbows linked. Then they lengthen their "bonds" by moving to hold hands at arms length. They also have to expand the circle by standing back, while they all stand further apart. This is like the molecular bonds around the hole.] So the ball can get through it. You have two options to show student by following. | When the plate is heated, the dimensions of the plate increase while maintaining their relative proportions. In other words, the overall area of the plate expands along with the size of the hole while the ratio of hole area to plate area remains the same. Heating causes the molecular bonds to lengthen, which causes the material to expand. You can think about it this way: a group of people standing in a tight circle with elbows linked try to lengthen their "bonds" by moving to hold hands at arms length. They have to expand the circle by standing back everyone stands further apart. This is analogous to the molecular bonds around the hole. This is considered a 2D expansion (the plate thickness is quite thin relative to the other dimensions) and can be described by |
| Line 55: | Line 66: |
| || {{attachment:4A30-22_01a.jpg}} || {{attachment:4A30-22_02a.jpg}} ||{{attachment:BallsPlate03-250.jpg}} ||{{attachment:BallsPlate04-250.jpg}} || ||{{attachment:BallsPlate05-250.jpg}} ||{{attachment:BallsPlate06-250.jpg}} ||{{attachment:BallsPlate07-250.jpg}} || |
ΔA/A = α,,A,,*ΔT = α,,L,,^2^*ΔT where A is the area at temperature T,,i,,, ΔA is the change in area when the material is at temperature T,,f,,, ΔT is T,,f,, - T,,i,,, and α is the coefficient of thermal expansion which depends on the material. See references below for more information. || {{attachment:4A30-22_01a.jpg}} || {{attachment:4A30-22_02a.jpg}} || {{attachment:BallsPlate03-250.jpg}} || {{attachment:BallsPlate04-250.jpg}} || || {{attachment:BallsPlate05-250.jpg}} || {{attachment:BallsPlate06-250.jpg}} || {{attachment:BallsPlate07-250.jpg}} || |
Balls and Plate, 4A30.22
Topic and Concept:
Thermal Properties of Matter, 4A30. Solid Expansion
Location:
Cabinet: Thermodynamics (TD)
Bay: (A3)?
Shelf: #1?
Abstract:
A plate with a hole is heated with a set of two balls, one over and one under size. Heat the plate and slip over both.
Equipment |
Location |
ID Number |
|
|
|
|
A brass plate with a hole |
4A30.22 |
|||||
Two metal balls attached to a rod |
4A30.22 |
|||||
Burner |
location |
NA |
||||
Liquid Nitrogen |
location |
NA |
||||
Safety glove and glasses |
location |
NA |
||||
Rooms 2103, 2241, (and 2223 upon request) |
|
Important Setup Notes:
This demonstration requires a supply of methane gas usually provided by the red and white gas carts found in rooms 2103, 2241, (and 2223 upon request).
- This demonstration requires a supply of liquid nitrogen. The main supply is located at the loading dock. If 12 hours notice given to lecture demo, supply will be provided.
Setup and Procedure:
To light the burner, connect the attached gas hose to the gas out (red panel) on the red and white gas cart.
- Open the gas valve.
- Light a match and bring it near the top of the burner.
- The flame will ignite the gas. Adjust the flame height accordingly by adjusting the valve.
Option A. Shrinking and expanding the balls
- Show that the smaller ball can get through the hole and the larger ball cannot.
- Heat the smaller ball with the burner and show that the smaller ball can no longer fit through the hole.
- Soak the larger ball in the liquid nitrogen and show that the larger ball can now fit through the hole.
Option B. Expanding the hole
- Demonstrate to students that the smaller ball can get through the hole and the larger ball cannot.
- Place the burner beneath the plate to heat it.
- Show that both balls now fit through the hole.
Cautions, Warnings, or Safety Concerns:
- Always use the gloves and safety glasses throughout this demonstration.
- Beware of the heated plate - contact with skin could cause severe burns!
- Use care when working with the liquid nitrogen - prolonged contact with skin causes severe frostbite!
Discussion:
When the plate is heated, the dimensions of the plate increase while maintaining their relative proportions. In other words, the overall area of the plate expands along with the size of the hole while the ratio of hole area to plate area remains the same. Heating causes the molecular bonds to lengthen, which causes the material to expand. You can think about it this way: a group of people standing in a tight circle with elbows linked try to lengthen their "bonds" by moving to hold hands at arms length. They have to expand the circle by standing back everyone stands further apart. This is analogous to the molecular bonds around the hole. This is considered a 2D expansion (the plate thickness is quite thin relative to the other dimensions) and can be described by
ΔA/A = αA*ΔT = αL2*ΔT
where A is the area at temperature Ti, ΔA is the change in area when the material is at temperature Tf, ΔT is Tf - Ti, and α is the coefficient of thermal expansion which depends on the material. See references below for more information.
|
|
|
|
|
|
|
Videos:
References: