243
edits
3D printing: Difference between revisions
Jump to navigation
Jump to search
→Polycarbonate
ElenaZhivun (talk | contribs) |
ElenaZhivun (talk | contribs) |
||
|
* The models crack at sharp corners in between layers (so no sharp corners).
* The models warp without a brim or a raft support.
* The models with thicker walls warp substantially more
* Warped parts can be trimmed down with a knife
* It's very difficult to remove supports from the small drill holes. The holes end up being deformed as well.
* 1/2 inch Thorlabs posts printed from the thorlabs models don't fit into their post holders.
| |||