Search results

* Max input is 23 dBm or 200 mW

...ty was working well. After alignment I was getting 10 mW of green from 65 mW of IR (15.4% efficiency). ...light to the cavity we saw 5.5 mW of green light. The input power was 45 mW.

...get around 33% out of the fiber at higher power (~600 mW). I get over 200 mW from the output of the fiber. ...owers, it seems to go back up at much higher powers, ~50mW control with 15 mW probe. beam sizes around 1mm. I can check my background better by looking

...probe power. I have seen control beam powers before the crystal up to 350 mW. If the RF is on for any length of time the fiber seems to become misalign ...re maybe on the cusp of seeing some original science. We can get up to 40 mW of green power at the crystal and can see the fluorescence using a photodio

...comparably low power with about 0.5 mW inside the cavity compared to the 3 mW of the orange laser (but inferior spatial mode) Also since it's CW, I cou ...ncident power, we only get about 200mW out under vacuum and about a couple mW out with gas. A shorter cavity might be much easier to lock to and the per

...eat (messy output, still no Stokes beam). Did get better output power (100 mW with vacuum, ~60 with .2 atm of D2).

! Current (mA) !! ASE (mW) !! output (mW) ! Current (mA) !! ASE (mW) !! output (mW)