Capacitively Coupled Charge Qubits: Difference between revisions

From Silicon Qubit Theory
Jump to navigation Jump to search
No edit summary
No edit summary
Line 57: Line 57:


==Rotations==
==Rotations==
After bringing the system adiabatically to the sweet spot <math>\epsilon_1=\epsilon_2=0</math>, we can apply an AC pulse to some of our parameters to induce a rotation within the system.

{| border="1" cellpadding="2"
!width="100"|AC Pulse
!width="225"|Resulting Matrix (Lab Basis)
!width="225"|Resulting Matrix (Energy Basis)
|-
|<math>\epsilon_1</math> || <math>\frac{1}{2}\left( \begin{matrix}
B & 0 & 0 & 0 \\
0 & B & 0 & 0 \\
0 & 0 & -B & 0 \\
0 & 0 & 0 & -B
\end{matrix}\right)\cos{(\omega_{AC}t)}</math> || <math>\frac{1}{2}\left( \begin{matrix}
0 & 0 & B & 0 \\
0 & 0 & 0 &B \\
B & 0 & 0 & 0 \\
0 & B & 0 & 0
\end{matrix}\right)\cos{(\omega_{AC}t)}</math>
|-
|<math>\epsilon_2</math> || <math>\frac{1}{2}\left( \begin{matrix}
B & 0 & 0 & 0 \\
0 & -B & 0 & 0 \\
0 & 0 & B & 0 \\
0 & 0 & 0 & -B
\end{matrix}\right)\cos{(\omega_{AC}t)}</math> || <math>\frac{1}{2}\left( \begin{matrix}
0 & 0 & B & 0 \\
0 & 0 & 0 &B \\
B & 0 & 0 & 0 \\
0 & B & 0 & 0
\end{matrix}\right)\cos{(\omega_{AC}t)}</math>
|-
|<math>\Delta_1</math> || <math>\frac{1}{2}\left( \begin{matrix}
0 & 0 & B & 0 \\
0 & 0 & 0 &B \\
B & 0 & 0 & 0 \\
0 & B & 0 & 0
\end{matrix}\right)\cos{(\omega_{AC}t)}</math> || <math>\frac{1}{2}\left( \begin{matrix}
0 & 0 & B & 0 \\
0 & 0 & 0 &B \\
B & 0 & 0 & 0 \\
0 & B & 0 & 0
\end{matrix}\right)\cos{(\omega_{AC}t)}</math>
|-
|<math>\Delta_2</math> || <math>\frac{1}{2}\left( \begin{matrix}
0 & B & 0 & 0 \\
B & 0 & 0 & 0 \\
0 & 0 & 0 & B \\
0 & 0 & B & 0
\end{matrix}\right)\cos{(\omega_{AC}t)}</math> || <math>\frac{1}{2}\left( \begin{matrix}
0 & 0 & B & 0 \\
0 & 0 & 0 &B \\
B & 0 & 0 & 0 \\
0 & B & 0 & 0
\end{matrix}\right)\cos{(\omega_{AC}t)}</math>
|}

Revision as of 19:44, 25 October 2014

This project started in the Fall of 2014, focusing on the operation of two or more charge qubits which are capacitively coupled.

General Formulation

Energy levels of the 2 qubit system as a function of both detunings.

For a single charge qubit, the Hamiltonian is

We will refer to and as the detuning and tunnel coupling of qubit , respectively.

We can further write down the full Hamiltonian explicitly:

where is the capacitive coupling between the qubits.

Sweet Spots

A major issue with charge qubits is that they are very susceptible to charge noise, which occurs when charge fluctuations outside the system induce undesired shifts in the parameters of the Hamiltonian. The goal of a sweet spot is to find a point in the parameter space where the energy levels are as invariant to the shifts as possible.

First Order Detuning Noise

The most dominant noise source is due to the shifts in the detuning. It is believed that the only point at which the first order dependence on the detunings disappears is at . This has been confirmed analytically in the limit of small , and no exceptions have been observed numerically.

Second Order Detuning Noise

Tunnel Coupling and Capacitive Coupling Noise

Assuming that we sit at the sweet spot , the energies are relatively simple, so we can easily see the effect of noise on the other parameters.

State Energy Effect of Effect of

Rotations

After bringing the system adiabatically to the sweet spot , we can apply an AC pulse to some of our parameters to induce a rotation within the system.

AC Pulse Resulting Matrix (Lab Basis) Resulting Matrix (Energy Basis)