Make-up Week - Lab Room Changeover Guidelines
Complete each of the following guidelines before signing off a room as changed, in roughly the order below. If you are unable to complete all of the steps, email Brett with the progress that you did make.
Equipment Removal Steps
- Examine all equipment for damage, then remove from regular lab tables to storage
- Remove any equipment with trouble cards to the hourly prep room
- Place all equipment from make-up table on cart
Cleaning Steps
- Tables and chairs rearranged to default configuration
- Shades 1/4 open
- Whiteboards erased and wiped down, marker tray wiped down, test and restock markers (one red, blue and green)
- Tables and chairs dusted off
- Tables cleaned with Windex, spot cleaning with alcohol (when using alcohol, be sure to windex afterwards or it will eat the varnish)
- Computers, monitors, and Pasco boxes turned off
- Computers and computer carts dusted and spot cleaned
- Thoroughly clean the make-up table
Equipment Setup Steps
- Set up one table for each experiment listed between now and the previous make-up week
- Neatly arrange all needed equipment for each experiment
- Examine all equipment for damage, labeling and replacing broken equipment as needed
- Place any unique items required for the lab in the cabinet.
- Follow any experiment specific setup instructions