|
Size: 1893
Comment:
|
Size: 1633
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 13: | Line 13: |
| Heat conduction demonstration. Two wooden dowels and a brass tube, 5/4 inches in diameter. |
|
| Line 14: | Line 16: |
| ---- /!\ '''Edit conflict - other version:''' ---- Heat Capacity Demonstration. wooden doweling Insert description of apparatus, its component, what it is demonstrating. ---- /!\ '''Edit conflict - your version:''' ---- Heat conduction demonstration. Two 5/4" wooden dowels and a brass tube. ---- /!\ '''End of edit conflict''' ---- |
|
| Line 37: | Line 26: |
| 1. Wrap a piece of paper around the wood and metal rod which are jointed end to end. 1. Install the burner gas tube with the gas source. 1. Make sure that you have the gas switch off and in the right pressure that you want before you turn it on. |
Note: Make sure that the red and white striped cart is in placed and connected to the utility trench which is connected to the gas infrastructure. 1. Wrap a sheet of paper around the wood dowel rods and brass tube which are jointed end to end. |
| Line 48: | Line 38: |
| Wrap a sheet of paper around the brass tube and the joint between the wooden doweling and the brass tube. Place the junction in the flame. The part of the paper wrapped around the wood will be darker than that around the metal because the metal has more rapidly conduction the heat away than the wood. | Wrap a sheet of paper around the brass tube and the joint between the wooden dowel rods and the brass tube. Place the junction in the flame. The part of the paper wrapped around the wood will be darker than that around the metal because the metal has more rapidly conduction the heat away than the wood. |
Wooden Doweling With (metal) tube , 4B.30.40
Location:
Cabinet: Thermodynamics Cabinet
Bay: (A4)
Shelf: #2
(attachment photo showing the fully set up demonstration)
Description:
Heat conduction demonstration. Two wooden dowels and a brass tube, 5/4 inches in diameter.
Equipment |
Location |
ID Number |
|
|
|
Wood and metal rod |
[:ThermoCabinetBayA4: TD, A4, Shelf #2] |
4B.30.40 |
Paper |
|
|
Scotch tape |
|
|
Burner |
|
|
Setup:
Note: Make sure that the red and white striped cart is in placed and connected to the utility trench which is connected to the gas infrastructure.
- Wrap a sheet of paper around the wood dowel rods and brass tube which are jointed end to end.
Cautions, Warnings, or Safety Concerns:
- Beware of hot frame.
- Demonstration may require practice.
Demonstration:
Wrap a sheet of paper around the brass tube and the joint between the wooden dowel rods and the brass tube. Place the junction in the flame. The part of the paper wrapped around the wood will be darker than that around the metal because the metal has more rapidly conduction the heat away than the wood.
attachment other photos |
attachment other photos |
attachment other photos |
attachment other photos |
References:
- List any references
[:FirstLaw:Heat and the First Law]
[:Demonstrations:Demonstrations]
[:Instructional:Home]