|
Size: 1566
Comment:
|
Size: 2695
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
| = Wood and metal rod , 4B.30.40 = | = Wood Dowels With Brass Tube , 4B.30.40 = |
| Line 13: | Line 13: |
| Insert description of apparatus, its component, what it is demonstrating. | A heat conduction demonstration. Demonstration setup time is less then 5 minutes. Gas cart setup time is 5 minutes if not installed. In this demonstration, two wooden dowels are inserted, part way, into both ends of a brass tube, 5/4 inches in diameter. A standard sheet of paper is then wrapped around the brass tube covering the whole tube and over lapping the wooden dowels evenly and placed over an open flame. Will the paper burn? |
| Line 17: | Line 19: |
| ||Wood and metal rod||[:ThermoCabinetBayA4: TD, A4, Shelf #2]|| || | ||Wood dowels and brass tube||[:ThermoCabinetBayA4: TD, A4, Shelf #2]||<:>4B.30.40 || |
| Line 24: | Line 26: |
| 1. Wrap a piece of paper around the wood and metal rod which are jointed end to end. 1. Install the burner gas tube with the gas source. 1. Make sure that you have the gas switch off and in the right pressure that you want before you turn it on. |
Note: Make sure that one of the red & white gas cart are in placed and the gas hose is connected to the utility trench gas line. The gas cylinder that supplies the gas to utility trench gas line may or may not be connected/installed and should be inspected. 1. Insert both wooden dowels into both ends of the brass tube. 1. Wrap a standard sheet of paper around the brass tube as tightly as possible. The paper should over lapping the wooden dowels evenly. 1. Tape only the seam of the paper and not to the wooden dowels. 1. Connect a Meeker Burner to an outlet on the red panel of the gas cart. 1. Safety Glasses 1. Matches or Liter |
| Line 29: | Line 36: |
| 1. Beware of hot frame. 1. Demonstration may require practice. |
1. Beware of hot flame. Sometimes that flame can not be seen 1. Know where the Fire Extinguishers are located. 1. Demonstration may require practice. |
| Line 35: | Line 43: |
| Wrap a piece of paper around the end-to-end-jointed wood and metal rod. Place the junction in the flame of the burner. The part of the paper wrapped around the wood will be darker that that around the metal because the metal has more rapidly conduction the heat away than the wood. | To show the thermal conductivity of the metal and wood, move the dowel system described above over an open flame and heat the paper evenly. Keep the taped seam away from the flame as mush as possible. The paper will begin to darken. However, the paper that is wrapped around the wood parts will darker more than that the paper that is raped around the brass tube. This is because the brass conducts the heat away more rapidly than the wooden area. |
| Line 39: | Line 47: |
'''Other Related Demonstrates:''' 1. Water Balloon over and open flame. |
Wood Dowels With Brass Tube , 4B.30.40
Location:
Cabinet: Thermodynamics Cabinet
Bay: (A4)
Shelf: #2
(attachment photo showing the fully set up demonstration)
Description:
A heat conduction demonstration. Demonstration setup time is less then 5 minutes. Gas cart setup time is 5 minutes if not installed.
In this demonstration, two wooden dowels are inserted, part way, into both ends of a brass tube, 5/4 inches in diameter. A standard sheet of paper is then wrapped around the brass tube covering the whole tube and over lapping the wooden dowels evenly and placed over an open flame. Will the paper burn?
Equipment |
Location |
ID Number |
|
|
|
Wood dowels and brass tube |
[:ThermoCabinetBayA4: TD, A4, Shelf #2] |
4B.30.40 |
Paper |
|
|
Scotch tape |
|
|
Burner |
|
|
Setup:
Note: Make sure that one of the red & white gas cart are in placed and the gas hose is connected to the utility trench gas line. The gas cylinder that supplies the gas to utility trench gas line may or may not be connected/installed and should be inspected.
- Insert both wooden dowels into both ends of the brass tube.
- Wrap a standard sheet of paper around the brass tube as tightly as possible. The paper should over lapping the wooden dowels evenly.
- Tape only the seam of the paper and not to the wooden dowels.
- Connect a Meeker Burner to an outlet on the red panel of the gas cart.
- Safety Glasses
- Matches or Liter
Cautions, Warnings, or Safety Concerns:
- Beware of hot flame. Sometimes that flame can not be seen
- Know where the Fire Extinguishers are located.
- Demonstration may require practice.
Demonstration:
To show the thermal conductivity of the metal and wood, move the dowel system described above over an open flame and heat the paper evenly. Keep the taped seam away from the flame as mush as possible. The paper will begin to darken. However, the paper that is wrapped around the wood parts will darker more than that the paper that is raped around the brass tube. This is because the brass conducts the heat away more rapidly than the wooden area.
attachment other photos |
attachment other photos |
attachment other photos |
attachment other photos |
Other Related Demonstrates:
- Water Balloon over and open flame.
References:
- List any references
[:FirstLaw:Heat and the First Law]
[:Demonstrations:Demonstrations]
[:Instructional:Home]