Walking the Spool, 1K10.30

Topic and Concept:

• [:AppNewtonsLaws#DynamicTorque: 1K10. Applications of Newton's Laws, Dynamic Torque]

Location:

• Cabinet: [:MechanicsCabinet:Mechanic (ME)]

• Bay: [:MechanicsCabinetBayA9:(A9)]

• Shelf: #2

attachment:WalkingSpool01-400.jpg

Abstract:

Pull on a cord wrapped around the axle of a large spool. The spool can be made to go forward or backward depending on the relative angle of applied torque.

Important Setup Notes:

• This demonstration may require practice.

Setup and Procedure:

1. Unravel enough of the string from the spool so that the audience can see you pull on the string.
2. Place the pool on a table so that the axle is horizontal as seen in the main photo above.
3. Apply a torque to the spool by pulling on the string. Try a mainly horizontal pull to make the spool move toward you. There is a critical angle as the string is pulled in a more upward direction whereupon the spool will begin to "walk" away from you.

Cautions, Warnings, or Safety Concerns:

• N/A

Discussion:

In order to make the spool "walk", a force must be applied to it to accelerate it into motion. In our case, this is a torque caused by the tension in the string. The magnitude of this torque is equal to the radius of the axle of the spool multiplied by the product of the tension and the sine of angle the sting makes with the radial line drawn to the point of contact. This is illustrated in the diagram from Wikipedia below. The walking direction that the spool assumes is decided by .... {finish discussion}

Videos:

• [https://www.youtube.com/user/LectureDemostrations/videos?view=1 Lecture Demonstration's Youtube Channel]

References:

• [https://en.wikipedia.org/wiki/Torque Wikipedia - Torque]

[:Instructional:Home]