|
Size: 1325
Comment:
|
Size: 1569
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 18: | Line 18: |
| ||all other parts||ME, Bay B1, Shelf #2|| || ||...||ME, Bay B1, Shelf #2|| || ||Possible supplies that are needed||Rode and Tack Cabinet|| || ||...|| In Lecture Halls|| || ||...|| Stock Cabinet || || ||...|| Stock Cabinet || || |
||Marbles box and bee wax||[:ThermoCabinetBayA4: TD, A4, Shelf #2|| || ||Burner|||| || |
| Line 27: | Line 24: |
| 1. Make a Setup check list. 1. ... |
1. Make sure that the marbles are attached to the rods in equal distance apart with wax. If not, you can use a bee wax to adhere the marble to the rods. 1. Install the burner gas tube with the gas source. 1. Make sure that you have the gas switch off and in the right pressure that you want before you turn it on. |
| Line 31: | Line 29: |
| 1. List any Warnings.... 1. Demonstration may require practice. |
1. Beware of the heated rods. |
| Line 37: | Line 34: |
| Insert description of demonstration, how is the demonstration preformed. | Join two rods(1-copper, 1 steel) at the center. Marbles are attached to rods equal distance from the center with wax. Them heat the center(end of each rod) and show marbles falling off at different rate and distance. |
| Line 46: | Line 43: |
| [Insert a back link to main topic list] | [:FirstLaw:Heat and the First Law] |
2 Rods with Marbles , 4B30.10
Location:
Cabinet: Thermodynamics Cabinet
Bay: (A4)
Shelf: #1
(attachment photo showing the fully set up demonstration)
Description:
Insert description of apparatus, its component, what it is demonstrating.
Equipment |
Location |
ID Number |
|
|
|
2 Rods with stand |
[:ThermoCabinetBayA4: TD, A4, Shelf #1] |
|
Marbles box and bee wax |
[:ThermoCabinetBayA4: TD, A4, Shelf #2 |
|
Burner |
|
|
Setup:
- Make sure that the marbles are attached to the rods in equal distance apart with wax. If not, you can use a bee wax to adhere the marble to the rods.
- Install the burner gas tube with the gas source.
- Make sure that you have the gas switch off and in the right pressure that you want before you turn it on.
Cautions, Warnings, or Safety Concerns:
- Beware of the heated rods.
Demonstration:
Join two rods(1-copper, 1 steel) at the center. Marbles are attached to rods equal distance from the center with wax. Them heat the center(end of each rod) and show marbles falling off at different rate and distance.
attachment other photos |
attachment other photos |
attachment other photos |
attachment other photos |
References:
- List any references
[:FirstLaw:Heat and the First Law]
[:Demonstrations:Demonstrations]
[:Instructional:Home]