Differences between revisions 1 and 19 (spanning 18 versions)

Aluminum Inclined Plane - Constant Acceleration, 1C20.40

Topic and Concept:

Motion in One Dimension, 1C20. Uniform Acceleration

Location:

Cabinet: Mechanic (ME)
Bay: Floor Item, Mechanics South Wall
Shelf: #1

Abstract:

The steel ball baring rolling down an inclined plane demonstrates how a body accelerates at constant acceleration (a fraction of g). The metronome allows for accurate timekeeping.

Equipment	Location	ID Number

Aluminum Inclined Plane	ME, South Wall, Shelf #1
2.5" Steel Ball Bearings	ME, Bay A4, Shelf #1
Metronome	ME, Bay A3, Shelf #4	1A10.40a

Important Setup Notes:

Practice releasing the ball in sync with the beats of the metronome. The metronome time may need adjusting so that the ball hits those marks.
The markings 1, 4, 9, 16 are distances in feet from the starting point.
5 minutes of setup time is needed.

Setup and Procedure:

Start by setting the metronome at 56 beats per minute.
Place the ball bearing at the top of the inclined plane.
Release. When released the ball should pass each mark on the track with the beats of the metronome. The ball should pass through #1 then hits marks 4, 9, and 16 (ie. the basket) that are marked on the side of the track.

Cautions, Warnings, or Safety Concerns:

Please do not drop the steel ball bearings

Discussion: N/A

Videos:

References:

Home

-  ⇤ ← Revision 1 as of 2011-07-14 21:04:17 → 
  Size: 1807
  Editor: srnarf
  Comment:
+   ← Revision 19 as of 2013-07-12 18:17:45 → ⇥
  Size: 2514
  Editor: localhost
  Comment: converted to 1.6 markup
-Deletions are marked like this.
+Additions are marked like this.
 Line 2:
-||<:30%>[:PiraScheme#Mechanics: Table of Mechanics Demonstration]||<:30%>[:MEEquipmentList: List of Mechanics Equipment & Supplies]||<:30%>[:Demonstrations:Lecture Demonstrations]||
+||<:30%>[[PiraScheme#Mechanics| Table of Mechanics Demonstration]]||<:30%>[[MEEquipmentList| List of Mechanics Equipment & Supplies]]||<:30%>[[Demonstrations|Lecture Demonstrations]]||
 Line 4:
-= Aluminum Inclined Plane - Acceleration, 1C20.40 =
+= Aluminum Inclined Plane - Constant Acceleration, 1C20.40 =

'''Topic and Concept:'''
  Motion in One Dimension, [[MotionIn1D#UniformAcceleration| 1C20. Uniform Acceleration]]
-Line 7:
+Line 10:
- * '''Cabinet:''' [:MechanicsCabinet:Mechanic (ME)]
+ * '''Cabinet:''' [[MechanicsCabinet|Mechanic (ME)]]
-Line 11:
+Line 14:
-attachment:AluminumInclinedPlane-01-400.jpg
+{{attachment:AluminumInclinedPlane-10-400.jpg}}
-Line 13:
+Line 16:
-'''Description:'''
+'''Abstract:'''
-Line 15:
+Line 18:
-Insert description of apparatus, its component, what it is demonstrating.
+The steel ball baring rolling down an inclined plane demonstrates how a body accelerates at constant acceleration (a fraction of g). The metronome allows for accurate timekeeping.
-Line 19:
+Line 22:
-||Aluminum Inclined Plane||[:MechanicsCabinet:ME], [:MechanicsCabinetBay:Floor Item - South Wall, Shelf #1||1C20.40||
||Large Steel Ball Bearings||ME, Bay A4, Shelf #1|| ||
||Metronome||ME, Bay B1, Shelf #2|| ||
||Possible supplies that are needed||Rode and Tack Cabinet|| ||
||...|| In Lecture Halls|| ||
||...|| Stock Cabinet || ||
||...|| Stock Cabinet || ||
+||Aluminum Inclined Plane||ME, South Wall, Shelf #1|| ||
||2.5" Steel Ball Bearings||ME, Bay [[MechanicsCabinetBayA4|A4]], Shelf #1|| ||
|| [[Metronome]]||ME, Bay [[MechanicsCabinetBayA3|A3]], Shelf #4||1A10.40a ||
-Line 28:
+Line 27:
- A.  '''''This demonstration requires a minimum 24 hour notice.'''''
 *  '''''This demonstration requires LN2'''''
 *  '''''Back-to-Back lectures is NOT possible; We'll do one lecture one day and the other the next day.'''''
+ *  '''''Practice''''' releasing the ball in sync with the beats of the metronome. The metronome time may need adjusting so that the ball hits those marks.
 * The markings 1, 4, 9, 16 are distances in feet from the starting point.
 * 5 minutes of setup time is needed.
-Line 33:
+Line 32:
-'''Setup:'''
+'''Setup and Procedure:''' 
 1. Start by setting the metronome at 56 beats per minute.
 1. Place the ball bearing at the top of the inclined plane.
 1. Release. When released the ball should pass each mark on the track with the beats of the metronome. The ball should pass through #1 then hits marks 4, 9, and 16 (ie. the basket) that are marked on the side of the track.
-Line 35:
+Line 37:
-. Make a Setup check list.
 1. ...
 Line 39:
-. List any Warnings....
 1. Demonstration may require practice.
+ * Please do not drop the steel ball bearings
-Line 43:
+Line 42:
-'''Demonstration:'''
+'''Discussion:''' 
N/A
 Line 45:
-Insert description of demonstration, how is the demonstration preformed.
-Line 47:
+Line 46:
-||attachment other photos||attachment other photos||
||attachment other photos||attachment other photos||
+||{{attachment:AluminumInclinedPlane-03-250.jpg}}||{{attachment:AluminumInclinedPlane-06-250.jpg}}||{{attachment:AluminumInclinedPlane-15-250.jpg}}||
||{{attachment:AluminumInclinedPlane-17-250.jpg}}||{{attachment:AluminumInclinedPlane-18-250.jpg}}||{{attachment:AluminumInclinedPlane-26-250.jpg}}||

'''Videos:'''
 * [[attachment:ALPlane-Acc.mts]]
 * [[https://www.youtube.com/user/LectureDemostrations/videos?view=1|Lecture Demonstration's Youtube Channel]]
-Line 51:
+Line 55:
-. List any references
+ *  N/A
-Line 55:
+Line 58:
-[:Instructional:Home]
+[[Instructional|Home]]

fw: Diff for "AlInclinedPlaneAcc"

Aluminum Inclined Plane - Constant Acceleration, 1C20.40