150
edits
FMCG/Operating procedure: Difference between revisions
Jump to navigation
Jump to search
→Absorption Scan
|
## '''Differential''' should not be enabled.
## The light next to '''Scan Probe''' should be bright green.
## With the D2 resonance at roughtly 7 kΩ, ramping the temperature from '''5 kΩ
## '''200 points''' with a '''100 ms''' dwell time at each point will allow the actual laser temperature to "keep up" with the set temperature as the ramp runs.
## A PreScan Dwell of '''10 s''' will allow the laser temperature to stabilize at the start temperature before the ramp begins.
# Clicking the LabVIEW '''Run''' button will begin the ramp. Results for each trace will be plotted in the XY Graph window. A .dat file containing all of the data collected (Thermistor resistance and 4 channels of voltage data) is recorded on the file in '''Path Out'''.
| |||