FMCG/Data Acquisition with LabVIEW Software: Difference between revisions

# The '''Response Waveforms''' tab plots the magnetometer responses to the calibration chirps in the top window, and individually the applied (white) and response (color) in the windows below. This is a good way to ensure the calibrations have sufficient signal to noise and that the I-V outputs did not rail during calibration. Again, use the '''NEXT''' button to scroll between channels.

# The '''Response Fits''' tab plots the amplitude and phase response of the magnetometer by Fourier-transforming the data from the previous tab. Note that the data in the '''Y Resp Fit''' sub-tab is in units of '''V/fT''', as it has taken into account the size of the applied field from the '''Calibration''' tab. The raw transformed voltage data can be found in the '''Y raw resp''' sub-tab.

# The '''Processing''' tab takes the time series from the '''Results''' tab and calibrates it using the response.

# The '''misc.''' and '''changelog''' tabs are not used on a day-to-day basis.