243
edits
ElenaZhivun (talk | contribs) (Created page with "= 3D printing = == Printer model and programs == I am making 3d prints with Ultimaker 2 printer that belongs to Ron's group. I am using Fusion 360 to make models and Cura to...") |
ElenaZhivun (talk | contribs) |
||
* 1/2 inch Thorlabs posts printed from the thorlabs models don't fit into their post holders.
* The printed parts can be machined
* If bent along the fibers, the models can take a lot of deformation without cracking
|