150
edits
FMCG/Shutdown and Takedown: Difference between revisions
Jump to navigation
Jump to search
→Complete takedown
(Created page with "=Daily= Generally at the end of the day, we turn off the heaters on the cells and turn off the lasers. # To turn off the heaters, hit the illuminated '''ON/OFF''' buttons on t...") |
|||
|
=Complete takedown=
Whenever Ron's group has a patient, it's necessary for us to clean up our crap from the room. You can follow the setup steps in reverse if you want, but it's pretty self
# All wires, cables, and fibers stay connected to the rack. So, you'll disconnect the bundle of Cat5 cables from the array and pass them through the port out of the room (with the blue zippered "hood" of course!). They do not get disconnected from the electronics on the rack. Rather, just coil them up and put them on the top. Similarly with the fibers (capped of course!). The one exception to this is the room coils, which get disconnected from the Cat5 breakout box and the leads are left hanging from the port (Ron's group uses these as well). The long BNC that is used for magnetometer nulling purposes is also left on the floor.
# The scopes can be powered down and put on the cart with the array. Their power cables can be coiled up on the bottom of the back of the rack along with the surge protector power cables.
| |||