150
edits
(Created page with "=WIMR= ==Cart== ===Top Level=== * Array, when not in use * Oscilloscopes * Fluke DMMs ===Middle Level=== * Tools (in drawers, crimp tool in its own box) * Protoboard, dead/un...") |
No edit summary |
||
| (8 intermediate revisions by the same user not shown) | |||
|
* Oscilloscopes
* Fluke DMMs
* Short/medium BNC cables
* Banana cables
* Fiber cartridge cleaner
===Middle Level===
* Tools (in drawers, crimp tool in its own box)
* Protoboard, dead/unused circuits
* Batteries
* Breakout boxes (Cat5->BNC, Serial DB9->BNC)
* Reconfigurable filter/attenuator
* Resistors, capacitors, potentiometers (in Lab Snacks box)
* Circuit and connector components (in clear plastic box)
* Plastic screws (6-32 to 1/4-20, in cloudy plastic box)
* Laser testing setup (mount for square pump/probe tubes, fiber launch for FC/APC, mounted photodiode, Ebert wheel)
* Zip ties
* 1x4 wire extension cords (works with detector leads
* Difference amplifier box
===Bottom Level===
* Optics mounts/stands/posts
* Plastic pieces
* Sticky stuff (tape, glue, clay)
* Q tips
* Vacuum grease
* BNC and banana components
==Desk
* Hardware (plastic and metal)
* Fiber optic connectors and mounts
* Laptop PCI card holder (when not in use)
* IR viewing card
* IR goggles for patients
==Wood cabinet next to printer==
* Soldering irons
* Solder, flux, and solder wick
* Helping Hands
* Canned air
* Fiber socket cleaning liquid
* Aerogel scraps (in Lab Snacks box)
* ND filters
* Asphere lenses
* 1/2" lenses
* Acetone and methanol
* Grounding bracelets
==Metal cabinet next to door to Sarah's office==
* Fibers
* Fiber splitters
* Wire and cabling
* Unused magnetometer array holders (4 ch and 2 ch)
* Miscellaneous box
* Fluxgate magnetometer and control box
==Yellow wheeled bin==
* Long (>1 m) BNC cables
* AC power cables
* +/-/GND cables and extenders
* +/-15V power supply
* Battery pack
* Cat5 cables
* Topward 6303D dual power supply (usually sits on top of bin)
| |||
edits