FMCG/Where Stuff Is

WIMR

Cart

Top Level

• Array, when not in use
• Oscilloscopes
• Fluke DMMs
• Short/medium BNC cables
• Banana cables
• Fiber cartridge cleaner

Middle Level

• Tools (in drawers, crimp tool in its own box)
• Protoboard, dead/unused circuits
• Batteries
• Breakout boxes (Cat5->BNC, Serial DB9->BNC)
• Resistors, capacitors, potentiometers (in Lab Snacks box)
• Circuit and connector components (in clear plastic box)
• Plastic screws (6-32 to 1/4-20, in cloudy plastic box)
• Laser testing setup (mount for square pump/probe tubes, fiber launch for FC/APC, mounted photodiode)

Bottom Level

• Optics
• Optics mounts/stands/posts
• Plastic pieces
• Sticky stuff
• BNC and banana components

Desk drawer (leftmost rolling set, top drawer)

• Hardware (plastic and metal)
• Fiber optic connectors and mounts
• Fiber caps and covers (in bag)
• Pens, pencils, markers

Desk shelf right above computer

• Laptop PCI card holder (when not in use)
• IR viewing card
• IR goggles for patients

Wood cabinet next to printer

• Soldering irons
• Solder, flux, and solder wick
• Helping Hands
• Canned air
• Fiber socket cleaning liquid
• Aerogel scraps (in Lab Snacks box)
• ND filters
• Asphere lenses
• 1/2" lenses
• Acetone and methanol
• Grounding bracelets

Metal cabinet next to door to Sarah's office

• Fibers
• Fiber splitters
• Wire and cabling
• Unused magnetometer array holders (4 ch and 2 ch)
• Miscellaneous box
• Fluxgate magnetometer and control box

Yellow wheeled bin

• Long (>1 m) BNC cables
• AC power cables
• +/-/GND cables and extenders
• +/-15V power supply
• Battery pack
• Cat5 cables
• Topward 6303D dual power supply (usually sits on top of bin)