Jared lab notebook: Difference between revisions
Jump to navigation
Jump to search
(Created page with "--~~~~ I need close to 17 mW of seed power for the 2nd FORT beam to work at 2 Watts. Although this is is in the range of acceptable powers for this TA I still want to contac...") |
No edit summary |
||
| Line 1: | Line 1: | ||
--[[User:Jmiles2|Jmiles2]] ([[User talk:Jmiles2|talk]]) 12:39, 13 May 2014 (CDT) |
--[[User:Jmiles2|Jmiles2]] ([[User talk:Jmiles2|talk]]) 12:39, 13 May 2014 (CDT) |
||
I need close to 17 mW of seed power for the 2nd FORT beam to work at 2 Watts. Although this is is in the range of acceptable powers for this TA I still want to contact M2K lasers and make sure the Intensity is not too high. I can only get about 40% through the AOM when powering it with 2 Watts. I get around 33% out of the fiber at higher power (~ |
I need close to 17 mW of seed power for the 2nd FORT beam to work at 2 Watts. Although this is is in the range of acceptable powers for this TA I still want to contact M2K lasers and make sure the Intensity is not too high. I can only get about 40% through the AOM when powering it with 2 Watts. I get around 33% out of the fiber at higher power (~600 mW). I get over 200 mW from the output of the fiber. |
||
Revision as of 17:40, 13 May 2014
--Jmiles2 (talk) 12:39, 13 May 2014 (CDT)
I need close to 17 mW of seed power for the 2nd FORT beam to work at 2 Watts. Although this is is in the range of acceptable powers for this TA I still want to contact M2K lasers and make sure the Intensity is not too high. I can only get about 40% through the AOM when powering it with 2 Watts. I get around 33% out of the fiber at higher power (~600 mW). I get over 200 mW from the output of the fiber.