Jared: Difference between revisions

Jump to navigation Jump to search

Jared (view source)

Revision as of 22:21, 16 April 2015

10 bytes added ,  16 April 2015
no edit summary
No edit summary
No edit summary
 
 
 
Diagram for the Lock Boxes used for all the saturated absorption locked lasers. There are 3 parts to the circuit. The first is a subtracter op amp circuit for the two photo diode signals. One signal will have the absorption, one will have the saturated absorption. The saturated absorption signal is more important and sometimes you don't even need the absorption signal.
 
1. The first is a subtracter op amp circuit for the two photo diode signals. One signal will have the absorption, one will have the saturated absorption. The saturated absorption signal is more important and sometimes you don't even need the absorption signal.
An LM399 voltage reverence is used for the Lock in amplifier ref input. This determines the frequency that the Lock In Amplifier uses.
 
The2. lockingAn partLM399 ofvoltage thereverence circuitis takesused the error signal fromfor the lockLock in amplifier andref putsinput. it throughThis adetermines feedthe back circuitfrequency that goesthe toLock theIn piezoAmplifier uses. W
 
3. The locking part of the circuit takes the error signal from the lock in amplifier and puts it through a feed back circuit that goes to the piezo. W
 
[https://wiki.physics.wisc.edu/yavuz/images/9/90/LockBoxRbLasers.pdf Lock Box Circuit]
Retrieved from "https://wiki.physics.wisc.edu/yavuz/index.php/Special:MobileDiff/1113"

Navigation menu