## page was renamed from M-12b-200
##master-page:ExperimentTemplate
#format wiki
#language en
=== M-12b: Air Track Resonance & Simple Harmonic Motion ===
==== Quantity: 14 ====
<<TableOfContents(4)>>

 * Lab Table Setup

[[attachment:M-12b-200.png|{{attachment:M-12b-200.png|attachment:M-12b-200.png|width="500 height=185"}}]]

==== Experiment Contents ====
 * 1 PC & Interface
 * 1 [[4327-1#PASCO_Hooke.27s_Law_Unit|Hooke's Law Unit]]
 * 1 [[Air Track Cart#Air_Track|Air Track]]
  * w/ [[Air Track Cart#Air_Supply|Air Supply]]
  * w/ [[Air Track Cart#T-Hose|Hose-T]]
  * w/ [[Air Track Cart#Air_Hose|Hose]]
  * w/ Adjustable Stop
 * 1 [[Air Track Cart#Glider_with_Timing_Plate|Glider w/ Timing Plate]]
  * w/ [[Air Track Cart#Reflecting_Vane|Reflecting Vane]]
 * 1 [[Air Track Cart#Glider_Accessory_Kit|Glider Accessory Kit]]
 * 1 [[4327-2#PASCO_Motion_Sensor|Motion Sensor]]
  * w/ Cable
  * w/ [[4327-1#S-W_T-Base_1.2BAC8-4.22_Support_Stand|1/4" T-Stand]]

 * 1 [[4327-2#Photogate|PASCO Photogate]]
  * w/ [[4327-3#PASCO_Photogate_Cord|Cord]]
  * w/ [[4327-1#S-W_T-Base_1.2BAC8-4.22_Support_Stand|1/4" T-Stand]]

==== Also for Classroom ====
 * 4 Boxes [[Miscellaneous#M-12b_Springs_25mm|25mm Springs]]
 * 1 Weight Box w/50g Weight Hangers (In Lab)

==== Check ====
 * For pairs of tables, air supplies should be on chairs between the tables.  Run two tracks from one supply via a Hose-T.
 * For tables against a wall, air supplies should be on the table next to the Pasco interfaces.

 * Position adjustable stop at mid-point
 * Attach springs toglider, stop and end-points

 * Computer Set-Up (PC, Interface On Before Computer, Sensors Work)
 * Air Tracks Work (Clean, No Clogged Air Holes, Glider Movement)
 * Glider Accessory Kit Including Glider Bands
 * Hose Intact

----
[[200 Level Index]] [[M-12-200|M-12]]