Liquid Nitrogen Filling Procedure

What You'll Need

Procedure

  1. Take the 100L liquid nitrogen tank from the Ice and Nitrogen room on the 4th floor down to the two liquid nitrogen tanks in the loading dock
  2. Go to the sign-out list, and mark that you are taking 100L (or however much is needed) from the tanks, being sure to fill in the date, what you are taking it for (Instructional), and your name.
  3. Open and uncap the gas phase valve
  4. Open the dispenser valve
  5. Connect the hose from the liquid nitrogen tank to the dispenser nozzle, tightening with your fingers and then with the wrench, until it is securely attached.
  6. Check one more time to make sure that all the valves are open and uncapped.
  7. Turn the dial of the liquid nitrogen container to "Open", allowing nitrogen to flow from the tanks into our smaller, more portable tank.
  8. Watch the amount that is in the liquid nitrogen tank.
  9. When it is as 100L (or close to it), shut off the dial of the main tank by twisting it clockwise, closing off the flow of liquid nitrogen into the tank.
  10. Close off the dispenser valve.
  11. Close off and cap the gas phase valve.
  12. Give the container a moment to sit until some of the frost that has formed on the liquid nitrogen tank has melted, and then use your wrenches to remove the connection between the tanks.
  13. Store the hose, and then bring the liquid nitrogen tank back upstairs.

Concerns