|
Size: 817
Comment:
|
Size: 1687
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
| == Capturing an Image == * Prep * computer is set up according to ComputerConfiguration ('''only needs to be done once''') * network infrastructure is set up according to NetworkConfiguration ('''only needs to be done once''') * run through the ImageChecklist to see that software meets requirements * Imaging * login using Putty * type "sudo su" to get to root@drbl * clear out stale config files {{{ [root@drbl ~]# rm /tftpboot/nbi_img/pxelinux.cfg/80* }}} * run {{{dcs}}} command {{{ [root@drbl ~]# dcs }}} on [[DRBL]], starting an interactive series of questions * Follow the prompts to specify computer by IP, ''clonezilla start'', ''save disk'', beginner or expert, ''shutdown'' (at your option) * Boot prepped computer from network * Should be hands-off, imaging happens (30-50 minutes) * Computer turns off |
|
| Line 3: | Line 24: |
| The basic process (for 1 to ~50 computers): | == Deploying an Image == |
| Line 5: | Line 26: |
| * computer is set up according to ComputerConfiguration ('''only needs to be done once''') * network infrastructure is set up according to NetworkConfiguration ('''only needs to be done once''') |
* Shouldn't be much, boot all computers to the boot media selection screen in BIOS (press F12 shortly after power-on) |
| Line 8: | Line 28: |
| * clear out stale config files {{{ [root@drbl ~]# rm /tftpboot/nbi_image/pxelinux.cfg/80* }}} * run {{{dcs}}} command {{{ [root@drbl ~]# dcs }}} on [[DRBL]], starting an interactive series of questions * use {{{ether-wake}}}, or equivalent script, to wake computer * monitor {{{/var/log/messages}}} on DRBL to see if all computers connect * '''imaging happens''' (~30 -- ~50 min) * computer shuts down (this is an optional, but ''highly recommended'', setting in {{{dcs}}}) |
* login to drbl.physics.wisc.edu using Putty * run {{{dcs}}} command * {{{ [yourusername@drbl ~]# sudo dcs }}} on [[DRBL]], starting an interactive series of questions: * Follow prompts to select a ''group'' of PCs by IP address * choose ''clonezilla start'', ''beginner, restore disk'', ''shutdown'' (at your option), choose image (created after the '''Capturing an Image''' step), ''multicast restore'' (for multiple PCs), * Boot prepped computer from network * Should be hands-off, imaging happens (10-40 min, slightly shorter than capturing) * Computer turns off ---- CategoryComputing |
Imaging Computers
Capturing an Image
- Prep
computer is set up according to ComputerConfiguration (only needs to be done once)
network infrastructure is set up according to NetworkConfiguration (only needs to be done once)
run through the ImageChecklist to see that software meets requirements
- Imaging
- login using Putty
- type "sudo su" to get to root@drbl
- clear out stale config files
[root@drbl ~]# rm /tftpboot/nbi_img/pxelinux.cfg/80*
run dcs command
[root@drbl ~]# dcs
on DRBL, starting an interactive series of questions
Follow the prompts to specify computer by IP, clonezilla start, save disk, beginner or expert, shutdown (at your option)
- Boot prepped computer from network
- Should be hands-off, imaging happens (30-50 minutes)
- Computer turns off
Deploying an Image
- Prep
- Shouldn't be much, boot all computers to the boot media selection screen in BIOS (press F12 shortly after power-on)
- Imaging
- login to drbl.physics.wisc.edu using Putty
run dcs command
[yourusername@drbl ~]# sudo dcs
on DRBL, starting an interactive series of questions:
Follow prompts to select a group of PCs by IP address
choose clonezilla start, beginner, restore disk, shutdown (at your option), choose image (created after the Capturing an Image step), multicast restore (for multiple PCs),
- Boot prepped computer from network
- Should be hands-off, imaging happens (10-40 min, slightly shorter than capturing)
- Computer turns off