## page was renamed from E-6-200
##master-page:ExperimentTemplate
#format wiki
#language en
=== E-6: Oscilloscopes and RC Decay ===
==== Quantity: 39 ====
<<TableOfContents(4)>>

[[attachment:E-6-200.png|{{attachment:E-6-200.jpg|attachment:E-6-200.jpg|width="500 height=138"}}]]

==== Experiment Contents ====
 * 1 [[3323-1#Leader_Oscilloscope|Oscilloscope]]
  * w/ 2 [[Hanging Oscilloscope Probes#BNC_to_Alligator_Cables|Oscilloscope Probes]]
  * 1 Oscilloscope Manual
 * 1 [[3323-1#Kruhn-Hite_Function_Generators|Function Generator]]
 * 1 [[3323-2#FlukeMultimeter|Fluke 115 Handheld Multimeter]]
  * w/[[Hanging PASCO Voltage Sensors#Fluke_Multimeter_Sensor|Fluke Multimeter Probe Set]]
 * 2 [[3323-3#BNC_to_Alligator_Cables|BNC to Alligator Cable]]
 * 1 [[3323-10#Plug_Board|Plug Board]]
  * w/[[3323-9#Plug_Board_Kit|Kit]]

==== Check ====
 * [[3323-9#Plug_Board_Kit|Plug Board Kit]] (30 Items)
  * Resistor Set (100Ω, 200Ω, 400Ω, 1kΩ, 2.2kΩ, 3.3kΩ, 4.7kΩ, 10kΩ, 20kΩ, 100kΩ, 10MΩ)
  * 8 Bridge Plugs
  * Capacitor Set (47nF, 1μF, 0.47μF)
  * Diode
  * Inductor (1 H)
  * SPDT Switch
  * Variable Resistor (1k)
  * Transistor (2N1480)
  * Differential Amplifier
  * Adapter Set (2 Pomona 1269, 2 Pomona 1296, 1 BNC 'T')

=== Troubleshooting ===
If the output of the differential amplifier is unstable, verify that all E-6 equipment is plugged into the Tripp Lite power strip, which is located adjacent to the lab table (see photo below), and the Tripp Lite power strip is plugged into the wall.  No E-6 equipment should be plugged into the power strip on the back of the computer cart, which has a dubious ground (as of 3/10/14).

[[attachment:TrippLite.png|{{attachment:TrippLite.png|attachment:TrippLite.png|width="500 height=138"}}]]

----
[[200 Level Index]]

[[Home]]