|
Size: 1593
Comment:
|
Size: 1868
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 11: | Line 11: |
| * 1 [[3323 Shelf-2#Leader_Oscilloscope|Oscilloscope]] * 1 [[3323-2#Kruhn-Hite_Function_Generators|Function Generator]] (Krohn-Hite, Pasco) * 1 [[3323-1#FlukeMultimeter|Fluke 115 Handheld Multimeter]] |
* 1 [[3323-1#Leader_Oscilloscope|Oscilloscope]] * w/ 2 [[Hanging Oscilliscope Probes#BNC to Alligator Cables|Oscilloscope Probe]] * 1 [[3323-1#Kruhn-Hite_Function_Generators|Function Generator]] (Krohn-Hite, Pasco) * 1 [[3323-2#FlukeMultimeter|Fluke 115 Handheld Multimeter]] |
| Line 15: | Line 16: |
| * 1 [[3323-3#BNC to Alligator Cables|BNC to Alligator Cable]] | |
| Line 17: | Line 19: |
| * 1 [[4327-2#UW_Timer|UW Timer]] (Include Only If Using Krohn-Hite Type Function Generator) | |
| Line 36: | Line 37: |
| If the output of the differential amplifier is unstable, the grounds should be checked. All equipment should be plugged into the Tripp Lite power strip (see photo below), and the Tripp Lite power strip should be plugged into the wall. | If the output of the differential amplifier is unstable, verify that all E-6 equipment is plugged into the Tripp Lite power strip, which is located adjacent to the lab table (see photo below), and the Tripp Lite power strip is plugged into the wall. No E-6 equipment should be plugged into the power strip on the back of the computer cart, which has a dubious ground (as of 3/10/14). |
| Line 38: | Line 39: |
| [[attachment:TrippLite.png]] | [[attachment:TrippLite.png|{{attachment:TrippLite.png|attachment:TrippLite.png|width="500 height=138"}}]] |
E-6: Cathode Ray Oscilloscope And Differential Amplifier
Quantity: 39
Contents
Experiment Contents
w/ 2 Oscilloscope Probe
1 Function Generator (Krohn-Hite, Pasco)
w/Kit
Also
- 1 Oscilloscope Manual
Check
Plug Board Kit (30 Items)
- Resistor Set (1kΩ, 2.2kΩ, 3.3kΩ, 4.7kΩ, 10kΩ, 20kΩ, 100kΩ, 10MΩ)
- 8 Bridge Plugs
- Capacitor Set (47nF, 1μF, 0.47μF)
- Diode
- Inductor (1 H)
- SPDT Switch
- Variable Resistor (1k)
- Transistor (2N1480)
- Differential Amplifier
- Adapter Set (2 Pomona 1269, 2 Pomona 1296, 1 BNC 'T')
Troubleshooting
If the output of the differential amplifier is unstable, verify that all E-6 equipment is plugged into the Tripp Lite power strip, which is located adjacent to the lab table (see photo below), and the Tripp Lite power strip is plugged into the wall. No E-6 equipment should be plugged into the power strip on the back of the computer cart, which has a dubious ground (as of 3/10/14).
