|
Size: 1593
Comment:
|
Size: 1809
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 36: | Line 36: |
| If the output of the differential amplifier is unstable, the grounds should be checked. All equipment should be plugged into the Tripp Lite power strip (see photo below), and the Tripp Lite power strip should be plugged into the wall. | If the output of the differential amplifier is unstable, the grounds should be checked. All E-6 equipment should be plugged into the Tripp Lite power strip, which is located adjacent to the lab table (see photo below), and the Tripp Lite power strip should be plugged into the wall. No E-6 equipment should be plugged into the power strip on the back of the computer cart. |
| Line 38: | Line 38: |
| [[attachment:TrippLite.png]] | [[attachment:TrippLite.png|{{attachment:TrippLite.png|attachment:TrippLite.png|width="500 height=138"}}]] |
E-6: Cathode Ray Oscilloscope And Differential Amplifier
Quantity: 39
Contents
Experiment Contents
1 Function Generator (Krohn-Hite, Pasco)
w/Kit
1 UW Timer (Include Only If Using Krohn-Hite Type Function Generator)
Also
- 1 Oscilloscope Manual
Check
Plug Board Kit (30 Items)
- Resistor Set (1kΩ, 2.2kΩ, 3.3kΩ, 4.7kΩ, 10kΩ, 20kΩ, 100kΩ, 10MΩ)
- 8 Bridge Plugs
- Capacitor Set (47nF, 1μF, 0.47μF)
- Diode
- Inductor (1 H)
- SPDT Switch
- Variable Resistor (1k)
- Transistor (2N1480)
- Differential Amplifier
- Adapter Set (2 Pomona 1269, 2 Pomona 1296, 1 BNC 'T')
Troubleshooting
If the output of the differential amplifier is unstable, the grounds should be checked. All E-6 equipment should be plugged into the Tripp Lite power strip, which is located adjacent to the lab table (see photo below), and the Tripp Lite power strip should be plugged into the wall. No E-6 equipment should be plugged into the power strip on the back of the computer cart.
