= Lab Room Changeover Guidelines =
Complete each of the following guidelines before signing off a room as changed, in roughly the order below.  At the end of each setup email unks@wisc.edu with a report of how the setup went.

== Equipment Removal Steps ==
 * Examine all equipment for damage, then remove from regular lab tables
 * Place a full set of equipment on the make-up cart
 * Remove any equipment with trouble cards to the hourly prep room

== Cleaning Steps ==
 * Tables and chairs rearranged to default configuration
 * Shades 1/4 open
 * Whiteboards erased and wiped down with dry erase cleaner and paper towels, marker tray wiped down, test and restock markers (one red, blue and green)
 * Tables and chairs dusted off
 * Tables cleaned with Windex, spot cleaning with alcohol (when using alcohol, be sure to windex afterwards or it will eat the varnish)

== Equipment Setup Steps ==
 * Neatly arrange all needed equipment for the new experiment on each of the 8 regular lab tables
 * Place any unique items required for the lab on the TA desk
 * Follow any experiment specific setup instructions
 * SUMMER ONLY -- Place one setup of the following experiment on the 9th table

== Cabinet and Supplies Steps ==
 * Straighten and restock standard equipment in the [[Lab Cabinet|cabinet]]
 * Straighten and restock standard equipment in the tape/stapler [[Supplies Hutch|hutch]]
 * Restock paper in black tray
 * Notify Brett if there is no toner cartridge on the printer cart