|
Size: 1492
Comment:
|
Size: 1331
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
| Complete each of the following guidelines before signing off a room as changed, in roughly the order below. If you are unable to complete all of the steps, email Brett with the progress that you did make. | Complete each of the following guidelines before signing off a room as changed, in roughly the order below. At the end of each setup email unks@wisc.edu with a report of how the setup went. |
| Line 15: | Line 15: |
| * Computers and computer carts dusted and spot cleaned | |
| Line 19: | Line 18: |
| * Examine all equipment for damage, labeling and replacing broken equipment as needed * Place any unique items required for the lab in the cabinet. |
* Place any unique items required for the lab on the TA desk |
Lab Room Changeover Guidelines
Complete each of the following guidelines before signing off a room as changed, in roughly the order below. At the end of each setup email unks@wisc.edu with a report of how the setup went.
Equipment Removal Steps
- Examine all equipment for damage, then remove from regular lab tables
- Place one complete set of apparatus on the equipment table
- Remove any equipment with trouble cards to the hourly prep room
Cleaning Steps
- Tables and chairs rearranged to default configuration
- Shades 1/4 open
- Whiteboards erased and wiped down, marker tray wiped down, test and restock markers (one red, blue and green)
- Tables and chairs dusted off
- Tables cleaned with Windex, spot cleaning with alcohol (when using alcohol, be sure to windex afterwards or it will eat the varnish)
Equipment Setup Steps
- Neatly arrange all needed equipment for the new experiment on each of the 8 regular lab tables
- Place any unique items required for the lab on the TA desk
- Follow any experiment specific setup instructions