= Make-up Week - Lab Room Changeover Guidelines =
Complete each of the following guidelines before signing off a room as changed, in roughly the order below.  If you are unable to complete all of the steps, email Brett with the progress that you did make.

== Equipment Removal Steps ==
 * Examine all equipment for damage, then remove from regular lab tables to storage
 * Remove any equipment with trouble cards to the hourly prep room
 * Place all equipment from make-up table on cart


== Cleaning Steps ==
 * Tables and chairs rearranged to default configuration
 * Shades 1/4 open
 * Whiteboards erased and wiped down, marker tray wiped down, test and restock markers (one red, blue and green)
 * Tables and chairs dusted off
 * Tables cleaned with Windex, spot cleaning with alcohol (when using alcohol, be sure to windex afterwards or it will eat the varnish)
 * Computers, monitors, and Pasco boxes turned off
 * Computers and computer carts dusted and spot cleaned
 * Thoroughly clean the make-up table

== Equipment Setup Steps ==
 * Set up one table for each experiment listed between now and the previous make-up week
 * Neatly arrange all needed equipment for each experiment
 * Examine all equipment for damage, labeling and replacing broken equipment as needed
 * Place any unique items required for the lab in the cabinet.
 * Follow any experiment specific setup instructions

== Cabinet and Supplies Steps ==
 * Straighten and restock standard equipment in the [[Lab Cabinet|cabinet]]
 * Straighten and restock standard equipment in the tape/stapler [[Supplies Hutch|hutch]]
 * Restock paper (3 reams)