Driven Oscillator

Quantity: 14

• Lab Table Setup

Experiment Contents

• 1 PC & Interface

• 1 Hooke's Law Unit

• 1 Air Track

  • w/ Air Supply

  • w/ Hose-T

  • w/ Hose

  • w/ Adjustable Stop

• 1 Glider w/ Timing Plate

  • w/ Reflecting Vane

• 1 Glider Accessory Kit

• 1 Motion Sensor

  • w/ Cable

  • w/ 1/4" T-Stand

• 1 Loudspeaker

  • w/ Vertical Mount Bracket

  • w/ Universal Table Clamp

  • w/ 1/2" Support Rod

• 1 PASCO Photogate

  • w/ Cord

  • w/ 1/4" T-Stand

Also for Classroom

• 4 Boxes 25mm Springs

• 1 Weight Box w/50g Weight Hangers (In Lab)

Check

• For pairs of tables, air supplies should be on chairs between the tables. Run two tracks from one supply via a Hose-T.
• For tables against a wall, air supplies should be on the table next to the Pasco interfaces.
• Position adjustable stop at mid-point
• Attach springs toglider, stop and end-points
• Computer Set-Up (PC, Interface On Before Computer, Sensors Work)
• Air Tracks Work (Clean, No Clogged Air Holes, Glider Movement)
• Glider Accessory Kit Including Glider Bands
• Hose Intact

---

200 Level Index M-12