Tektronix TDS 3014 Four Channel Digital Oscilloscope

Location:

This device takes an electric signal (up to four at one time), processes it, and displays it in color in the form of a voltage versus time plot.

Important Setup Notes:

Setup and Procedure:

Plug in the oscilloscope.
Turn on the oscilloscope by pressing the power button located on the lower left-hand corner of the display side.
Plug in signal-carrying coaxial cable to channel 1.
Adjust scale by turning the horizontal and vertical scale knobs.
Adjust the position of the displayed waveform by turning the horizontal and vertical position knobs.
Adjust the trigger level by turning the trigger level knob.

attachment:TuningForkOscilliscope15-250.jpg	attachment:TuningForkOscilliscope16-250.jpg	attachment:TuningForkOscilliscope17-250.jpg	attachment:TuningForkOscilliscope19-250.jpg
attachment:TuningForkOscilliscope20-250.jpg	attachment:TuningForkOscilliscope21-250.jpg

References:

[:Instructional:Home]

-  ⇤ ← Revision 2 as of 2013-06-19 22:17:10 → 
  Size: 1266
  Editor: srnarf
  Comment:
+   ← Revision 3 as of 2013-06-25 17:29:23 → ⇥
  Size: 1648
  Editor: srnarf
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 7:
- * '''Cabinet:''' Waves and Sound (WS)
 * '''Bay:''' [:MechanicsCabinetBayA1:(A1)]??
 * '''Shelf:''' #1,2,3.. ??
+ * '''Cabinet:''' [:EMCabinet: (E&M)]
 * '''Bay:''' [:EMCabinetLtBayB1:(B1 Left)]
 * '''Shelf:''' #2
 Line 22:
-. List steps for setup then procedure.
 1. ...
+. Plug in the oscilloscope.
 1. Turn on the oscilloscope by pressing the power button located on the lower left-hand corner of the display side.
 1. Plug in signal-carrying coaxial cable to channel 1.
 1. Adjust scale by turning the horizontal and vertical scale knobs.
 1. Adjust the position of the displayed waveform by turning the horizontal and vertical position knobs.
 1. Adjust the trigger level by turning the trigger level knob.

fw: Diff for "Oscilloscope"