Differences between revisions 5 and 6
Revision 5 as of 2009-03-02 20:06:31
Size: 1535
Editor: srnarf
Comment:
Revision 6 as of 2009-03-02 20:51:24
Size: 2274
Editor: srnarf
Comment:
Deletions are marked like this. Additions are marked like this.
Line 21: Line 21:
 1. Make a Setup check list.
 1. ...
 1. '''''This demonstration requires minimum 24hr notice.'''''
 1. '''''This demonstration requires 45 minutes'''''
 1. Photos below show the setup in stages. First Clear off the ping pong balls, straiten the traps and tails. This is the storage position.
 1. Set all traps; only this part can be a two person job. Start from the back left or right corner work toward the center then front.
 1. Let system of set traps seat for several minutes (5-10) to let the week one snap. If any snap, reset them. Periodically bang and kick that cage to set off any weakly set traps and then reset them. Do this several time until it is hard to snap more then one.
 1. Ping pong balls "must be" placed on the traps within the classroom. Thus, move the cage to were the demonstration is to take place.
Line 26: Line 30:
 1. Demonstration may require practice.
 1. CAREFULLY place th

Mousetrap Chain Reaction, 7D20.10

Location:

  • Floor Item Room 2237.

attachment:MouseTrap500.jpg

Description:

A large acrylic enclosure(60"x32"x40")contains 251 mouse traps in a 15x17 array are set with 251 ping pong balls in top. Then trigger with 1 to 3 ping pong balls from above.

Equipment

Location

ID Number

Mousetrap Chain Reaction

MP, Large Equipment Area

7D20.10

Setup:

  1. This demonstration requires minimum 24hr notice.

  2. This demonstration requires 45 minutes

  3. Photos below show the setup in stages. First Clear off the ping pong balls, straiten the traps and tails. This is the storage position.
  4. Set all traps; only this part can be a two person job. Start from the back left or right corner work toward the center then front.
  5. Let system of set traps seat for several minutes (5-10) to let the week one snap. If any snap, reset them. Periodically bang and kick that cage to set off any weakly set traps and then reset them. Do this several time until it is hard to snap more then one.
  6. Ping pong balls "must be" placed on the traps within the classroom. Thus, move the cage to were the demonstration is to take place.

Cautions, Warnings, or Safety Concerns:

  1. List any Warnings....
  2. CAREFULLY place th

Demonstration:

Insert description of demonstration, how is the demonstration preformed.

attachment:MouseTrap250-1.jpg

attachment:MouseTrap250-2.jpg

attachment:MouseTrap250-3.jpg

attachment:MouseTrap250-4.jpg

attachment:MouseTrapSetup250-1.jpg

attachment:MouseTrapSetup250-2.jpg

attachment:MouseTrapSetup250-3.jpg

attachment:MouseTrapSetup250-4.jpg

attachment:MouseTrapSetup250-5.jpg

attachment:MouseTrapSetup250-6.jpg

attachment:MouseTrapMovie.mpg

References:

  1. [http://www.ap.smu.ca/demos/content/modern/mousetrap_reactor/mousetrap_reactor.html Department of Astronomy & Physics, Saint Mary's University, Halifax, N.S., Canada]

[Insert a back link to main topic list]

[:Demonstrations:Demonstrations]

[:Instructional:Home]

fw: MousetrapChainReaction (last edited 2013-08-06 19:36:44 by srnarf)