Melde's Vibrating String (Elastic), 3B22.10

Location:

(attachment photo showing the fully set up demonstration)

Description:

The Pasco driver controlled by a function generator vibrates elastic cord. By varying the driving frequency and amplitude one can produce standing waves. The nodes and the antinodes can be seen better by using the strobe lights.

Equipment

Location

ID Number

Pasco Mechanical Vibrator

[:WavesSoundCabinetA3A4: WS, Bay A4, Shelf #1]

Ring Stand with Elastic Cord

[:WavesSoundCabinetA3A4: WS, Bay A4, Shelf #1]

3B22.10

Strobe Lights

WS Bay, B7, Shelf #2

Function Generator

E&M, Bay B1, Shelf #3

Lead Brick

Rod and Stand Cabinet

(by Lecture Hall)

Extra Elastic Cord

WS, Bay A3, Shelf #3

Setup:

  1. Take the small ring stand with the elastic cord wrapped around it. Unwrap enough cord to stretch the cord a crossed the lecture bench.
  2. With the Pasco vibrator, take the looped end of the cord and string in through the forked tip and onto the base set screw that is typically used to hold rods. This will anchor the cord.
  3. place the lead brick in front of the vibrator to prevent the cord from pulling or tipping the the vibrator.

Cautions, Warnings, or Safety Concerns:

  1. Strobes can bother students with epilepsy. This warning should be stated in class before doing the demonstration.

Demonstration:

Insert description of demonstration, how is the demonstration preformed.

attachment other photos

attachment other photos

attachment other photos

attachment other photos

References:

  1. List any references

[:Demonstrations:Demonstrations]

[:Instructional:Home]