|
Size: 2432
Comment:
|
Size: 3431
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 25: | Line 25: |
| ||Springs||[:MechanicsCabinetBayA5: ME, Bay A5, Shelf #2]|| || ||Mass||[:MechanicsCabinetBayA5: ME, Bay A5, Shelf #2]|| || ||Rod and Clamps||Rod and tackle cabinet located near main lecture halls.|| || |
|
| Line 33: | Line 36: |
| 1. List steps for setup then procedure. 1. ... |
1. Vertically mount 3/4" rod to lecture bench using blue table clamp. 1. Horizontally mount 1/4" rod to the vertical rod using a right angle clamp. 1. Mount the Pasco driver to the 1/4" rod so that the driving component will move in a vertical direction. 1. Place the function generator on the table near the rod, and plug it in. 1. Connect the driver to the function generator with the two wires. Positive to positive. Ground to ground. 1. Hang the spring from the driver. 1. Hang the mass from the spring. 1. When ready, turn on the function generator by pressing the "On" button. 1. The mass will begin to oscillate in a vertical direction. Adjust the frequency of oscillation by changing the driving frequency set on the function generator so that the system approaches resonance (some practice beforehand is recommended). |
| Line 47: | Line 57: |
| ||attachment:DrivenMassSpring26-250.jpg||attachment:DrivenMassSpring27-250.jpg||attachment:DrivenMassSpring28-250.jpg|| ||attachment:DrivenMassSpring29-250.jpg||attachment:DrivenMassSpring30-250.jpg|| |
||attachment:DrivenMassSpring26-250.jpg||attachment:DrivenMassSpring27-250.jpg||attachment:DrivenMassSpring28-250.jpg||attachment:DrivenMassSpring29-250.jpg|| ||attachment:DrivenMassSpring30-250.jpg|| |
[:PiraScheme#Mechanics: Table of Mechanics Demonstration] |
[:MEEquipmentList: List of Mechanics Equipment & Supplies] |
[:Demonstrations:Lecture Demonstrations] |
Driven Mass on a Spring, 3A60.39
Topic and Concept:
Oscillations, [:Oscillations#DrivenRes: 3A60. Driven Mechanical Resonance]
Location:
Cabinet: [:MechanicsCabinet:Mechanic (ME)]
Bay: [:MechanicsCabinetBayA1:(A1)]
Shelf: #1,2,3..
attachment:DrivenMassSpring18-400.jpg
Abstract:
A function generator drives a spring with a suspended mass. The frequency is adjusted until resonance is reached.
Equipment |
Location |
ID Number |
|
|
|
Function Generator |
[:MechanicsCabinetBayB1: ME, Bay B1, Shelf #2] |
|
Pasco Driver |
[:MechanicsCabinetBayB1: ME, Bay B1, Shelf #2] |
|
BNC Wire |
[:MechanicsCabinetBayA5: ME, Bay A5, Shelf #2] |
|
Springs |
[:MechanicsCabinetBayA5: ME, Bay A5, Shelf #2] |
|
Mass |
[:MechanicsCabinetBayA5: ME, Bay A5, Shelf #2] |
|
Rod and Clamps |
Rod and tackle cabinet located near main lecture halls. |
|
Important Setup Notes:
- Demonstration may require practice.
Setup and Procedure:
- Vertically mount 3/4" rod to lecture bench using blue table clamp.
- Horizontally mount 1/4" rod to the vertical rod using a right angle clamp.
- Mount the Pasco driver to the 1/4" rod so that the driving component will move in a vertical direction.
- Place the function generator on the table near the rod, and plug it in.
- Connect the driver to the function generator with the two wires. Positive to positive. Ground to ground.
- Hang the spring from the driver.
- Hang the mass from the spring.
- When ready, turn on the function generator by pressing the "On" button.
- The mass will begin to oscillate in a vertical direction. Adjust the frequency of oscillation by changing the driving frequency set on the function generator so that the system approaches resonance (some practice beforehand is recommended).
Cautions, Warnings, or Safety Concerns:
- N/A
Discussion:
Discuss the physics behind the demonstration, explaining some of the various steps of the demonstration when appropriate.
attachment:DrivenMassSpring13-250.jpg |
attachment:DrivenMassSpring14-250.jpg |
attachment:DrivenMassSpring15-250.jpg |
attachment:DrivenMassSpring16-250.jpg |
attachment:DrivenMassSpring17-250.jpg |
attachment:DrivenMassSpring19-250.jpg |
attachment:DrivenMassSpring20-250.jpg |
attachment:DrivenMassSpring21-250.jpg |
attachment:DrivenMassSpring22-250.jpg |
attachment:DrivenMassSpring23-250.jpg |
attachment:DrivenMassSpring24-250.jpg |
attachment:DrivenMassSpring25-250.jpg |
attachment:DrivenMassSpring26-250.jpg |
attachment:DrivenMassSpring27-250.jpg |
attachment:DrivenMassSpring28-250.jpg |
attachment:DrivenMassSpring29-250.jpg |
attachment:DrivenMassSpring30-250.jpg |
Videos:
[https://www.youtube.com/user/LectureDemostrations/videos?view=1 Lecture Demonstration's Youtube Channel]
References:
[https://en.wikipedia.org/wiki/Harmonic_oscillator Wikipedia - Harmonic Oscillator]
[https://en.wikipedia.org/wiki/Resonance Wikipedia - Resonance]
[:Instructional:Home]