Differences between revisions 8 and 10 (spanning 2 versions)
Revision 8 as of 2008-04-24 16:28:36
Size: 1103
Editor: reardon
Revision 10 as of 2013-07-12 18:17:40
Size: 1131
Editor: localhost
Comment: converted to 1.6 markup
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
#acl reardon:read,write,delete,revert,admin FacultyGroup:read,write All:read
Line 3: Line 4:
Precipitator located in [:ElectrostaticsCabinet:ElectrostaticsCabinet], A2 Precipitator located in [[ElectrostaticsCabinet]], A2
Line 5: Line 6:
Toepler-Holtz generator located in [:ElectrostaticsCabinet:ElectrostaticsCabinet], A3 Toepler-Holtz generator located in [[ElectrostaticsCabinet]], A3
Line 21: Line 22:
attachment:CottrellPrecipitator5B3060.jpg {{attachment:CottrellPrecipitator5B3060.jpg}}
Line 23: Line 24:
[:ElectricFieldsAndPotential: Electric Fields and Potential] [[ElectricFieldsAndPotential| Electric Fields and Potential]]
Line 25: Line 26:
[:Demonstrations:Demonstrations] [[Demonstrations]]
Line 27: Line 28:
[:Instructional:Home] [[Instructional|Home]]

Cottrell Precipitator 5B30.60

Precipitator located in ElectrostaticsCabinet, A2

Toepler-Holtz generator located in ElectrostaticsCabinet, A3

Light a cone of incense and place the incense in the precipitator.

Discharge Toepler-Holtz generator: grasp insulating handles and put terminals (2cm diameter metal balls) in contact with each other.

Connect the electrodes at the end of the tube to the Toepler-Holtz generator.

Separate the terminals of the Toepler-Holtz by 5 cm.

Wait until the tube fills with smoke.

Crank the generator (there should be no sparking between the terminals). The smoke should clear ("precipitate").

Discharge Toepler-Holtz generator--you will likely see a fat spark between the two terminals as you do this. Do not put your hands near the terminals before you discharge them--the spark from the Toepler-Holtz can be painful.


Electric Fields and Potential



fw: CottrellPrecipitator (last edited 2013-07-12 18:17:40 by localhost)