|
Size: 2382
Comment:
|
Size: 3564
Comment: converted to 1.6 markup
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
| ||<:30%>[:PiraScheme#Mechanics: Table of Mechanics Demonstration]||<:30%>[:MEEquipmentList: List of Mechanics Equipment & Supplies]||<:30%>[:Demonstrations:Lecture Demonstrations]|| | ||<:30%>[[PiraScheme#Mechanics| Table of Mechanics Demonstration]]||<:30%>[[MEEquipmentList| List of Mechanics Equipment & Supplies]]||<:30%>[[Demonstrations|Lecture Demonstrations]]|| |
| Line 4: | Line 4: |
| = CENCO Ballistic Cart with Launcher, 1D60.10a = | = Ballistic Cart Launcher (CENCO), 1D60.10a = '''Topic and Concept:''' Motion in Two Dimensions, [[MotionIn2D#ProjectileMotion| 1D60. Projectile Motion]] |
| Line 7: | Line 10: |
| * '''Cabinet:''' [:MechanicsCabinet:Mechanic (ME)] * '''Bay:''' [:MechanicsCabinetBayA5:(A5)] |
* '''Cabinet:''' [[MechanicsCabinet|Mechanic (ME)]] * '''Bay:''' [[MechanicsCabinetBayA5|(A5)]] |
| Line 11: | Line 14: |
| attachment:BallisticsCarA-05-400.jpg | {{attachment:BallisticsCarA-05-400.jpg}} |
| Line 15: | Line 18: |
| The SENCO ballistic cart is equipped with a spring loaded vertical ball launcher. The launcher is fired when the pin is pulled out by a string. | The CENCO ballistic cart is equipped with a spring loaded vertical ball launcher. The ball is launched vertically into the air when a pin is pulled out by a string that is attached to a clamp on the table. The cart and ball move at constant velocity. The cart catches the ball some time later after the cart has gone underneath a bridge and the ball when over the bridge. |
| Line 19: | Line 22: |
| ||Cenco Ballistic Cart Launcher||[:MechanicsCabinetBayA5:ME Cabinet, Bay A5], Shelf #6||1D60.10a|| | ||Ballistic Cart Launcher (Cenco)||[[MechanicsCabinetBayA5|ME Cabinet, Bay A5]], Shelf #6||1D60.10a|| |
| Line 21: | Line 24: |
| ||Wooden Bridge||[:MechanicsCabinetBayA5:ME Cabinet, Bay A5], Shelf #5|| || | ||Wooden Bridge||[[MechanicsCabinetBayA5|ME Cabinet, Bay A5]], Shelf #5|| || |
| Line 26: | Line 29: |
| N/A | * '''This demonstration requires practice''' * Setup time is about 5 minutes * If the vertical alignment of barrow is off, the ball will not go back into the cup. Check the level of the table and if necessary there are 2 adjustment screws on the bottom of the cart that will help you to realign the barrow. |
| Line 28: | Line 33: |
| '''Setup:''' | '''Setup and Procedure:''' |
| Line 30: | Line 35: |
| 1. Set up the bridge, the hose and the lead bricks in such a way that the cart does not roll off the table. Make sure the open side of the bridge is the right distance from the edge of the table so that the trigger string can be released right before the ball goes under the bridge. 2. Clamp the string to the lab bench. 3. Load the ball into the launcher by pressing it down and placing the spring in the whole. 4. Roll the cart under the bridge. It should be going relatively fast. |
1. Make sure that the lecture bench is level. 1. Clamp the C-clamp with string and trigger pin to one end of the lecture bench. 1. Set up the bridge. Make sure that the bridge is the right distance the cart with the trigger string fully extended. This distance is about 1 foot. 1. The hose is set out some distance from the bridge such that it stops the cart from roll off the table. The lead bricks are used to hold the hose. 1. Load the ball into the launcher by pressing it down all the way and placing the trigger pin in the second whole. '''Cautions, Warnings, or Safety Concerns:''' |
| Line 35: | Line 44: |
| '''Cautions, Warnings, or Safety Concerns:''' 1. The lead blocks weight about 32lbs. Take care no to drop them or strain yourself. 1. Don't let the cart fall off of the lab bench, it is heavy. |
* The lead blocks weigh about 32lbs. Take care not to drop them or strain yourself. * Don't let the cart fall off of the lecture bench; The alignment will get messed up. |
| Line 42: | Line 50: |
| The cart rolls at constant velocity. It launches the ball, goes under the bride, and catches the ball. Because both the ball and the cart have constant velocity in the horizontal direction the ball will fall back into the launcher. Horizontal and vertical motion are independent. | Give the cart a good push. It takes practice to get the right speed so that the ball is in the air when the cart is under the bridge. After you push it, the cart rolls at constant velocity. It launches the ball, goes under the bridge, and catches the ball. The ball goes over the bridge and the cart goes under. Because both the ball and the cart have constant velocity in the horizontal direction the ball will fall back into the launcher. Horizontal and vertical motion are independent. |
| Line 44: | Line 52: |
| attachment:BallisticsCarADemo.mpg | '''Videos:''' * [[https://www.youtube.com/user/LectureDemostrations/videos?view=1|Lecture Demonstration's Youtube Channel]] * [[attachment:BallisticsCarADemo.mpg]] * [[attachment:BallisticsCarADemo.mts]] * [[attachment:BallisticsCarDemo.webm]] |
| Line 46: | Line 58: |
| ||attachment:BallisticsCarA-01-250.jpg||attachment:BallisticsCarA-02-250.jpg|| ||attachment:BallisticsCarA-03-250.jpg||attachment:BallisticsCarA-04-250.jpg|| |
||{{attachment:BallisticsCarA-01-250.jpg}}||{{attachment:BallisticsCarA-02-250.jpg}}|| ||{{attachment:BallisticsCarA-03-250.jpg}}||{{attachment:BallisticsCarA-04-250.jpg}}|| |
| Line 51: | Line 63: |
| 1. List any references | |
| Line 53: | Line 64: |
[:Instructional:Home] |
[[Instructional|Home]] |
Ballistic Cart Launcher (CENCO), 1D60.10a
Topic and Concept:
Motion in Two Dimensions, 1D60. Projectile Motion
Location:
Cabinet: Mechanic (ME)
Bay: (A5)
Shelf: #6
Description:
The CENCO ballistic cart is equipped with a spring loaded vertical ball launcher. The ball is launched vertically into the air when a pin is pulled out by a string that is attached to a clamp on the table. The cart and ball move at constant velocity. The cart catches the ball some time later after the cart has gone underneath a bridge and the ball when over the bridge.
Equipment |
Location |
ID Number |
|
|
|
Ballistic Cart Launcher (Cenco) |
ME Cabinet, Bay A5, Shelf #6 |
1D60.10a |
Corrugated Vacuum Hose |
Stock cabinet by elevator |
|
Wooden Bridge |
ME Cabinet, Bay A5, Shelf #5 |
|
Lead Blocks |
Rod and Tack Cabinet |
|
Important Setup Notes:
This demonstration requires practice
- Setup time is about 5 minutes
- If the vertical alignment of barrow is off, the ball will not go back into the cup. Check the level of the table and if necessary there are 2 adjustment screws on the bottom of the cart that will help you to realign the barrow.
Setup and Procedure:
- Make sure that the lecture bench is level.
- Clamp the C-clamp with string and trigger pin to one end of the lecture bench.
- Set up the bridge. Make sure that the bridge is the right distance the cart with the trigger string fully extended. This distance is about 1 foot.
- The hose is set out some distance from the bridge such that it stops the cart from roll off the table. The lead bricks are used to hold the hose.
- Load the ball into the launcher by pressing it down all the way and placing the trigger pin in the second whole.
Cautions, Warnings, or Safety Concerns:
- The lead blocks weigh about 32lbs. Take care not to drop them or strain yourself.
- Don't let the cart fall off of the lecture bench; The alignment will get messed up.
Demonstration:
Give the cart a good push. It takes practice to get the right speed so that the ball is in the air when the cart is under the bridge. After you push it, the cart rolls at constant velocity. It launches the ball, goes under the bridge, and catches the ball. The ball goes over the bridge and the cart goes under. Because both the ball and the cart have constant velocity in the horizontal direction the ball will fall back into the launcher. Horizontal and vertical motion are independent.
Videos:
|
|
|
|
References: