Differences between revisions 4 and 5
 ⇤ ← Revision 4 as of 2012-08-09 17:14:01 → Size: 2123 Editor: srnarf Comment: ← Revision 5 as of 2012-08-09 20:41:08 → ⇥ Size: 2501 Editor: srnarf Comment: Deletions are marked like this. Additions are marked like this. Line 18: Line 18: A turntable is rotated until objects slide off or tip over. An objects slides off a rotating turntable depending on the object's distance from the center of rotation or the rotational speed of the turntable. Line 23: Line 23: ||Blocks||ME, Bay A9, Shelf #1|| || ||Blocks, (Stoppers)||ME, Bay A9, Shelf #1|| || Line 34: Line 34: 1. Place block(s) on turn table. Line 36: Line 35: 1. Place block(s) on turn table at versus radii until it flies off.  1. Use a ceiling camera to display the turntable to the audience. Line 44: Line 44: When the turntable moves, the only force on the blocks allowing them to move with the turntable is friction. As per Newton's first law, the blocks, once set in motion, "want" to travel in a straight line. To alter their motion and put them into a circular trajectory, a centripetal force must act on the blocks. When the turntable moves, the only force on the blocks allowing them to move with the turntable is friction. As per Newton's first law, the blocks, once set in motion, "want" to travel in a straight line. To alter their motion and put them into a circular trajectory, a centripetal force must act on the blocks. However, at a curtain radius (or rotational speed) the frictional force is not enough to keep the block on the turntable so the block slides off nearly talent to the rotation.
 [:PiraScheme#Mechanics: Table of Mechanics Demonstration] [:MEEquipmentList: List of Mechanics Equipment & Supplies] [:Demonstrations:Lecture Demonstrations]

# Block on a Rotating Table, 1D55.30

Topic and Concept:

Location:

attachment:BlockonRotatingTable-01-400.jpg

Abstract:

An objects slides off a rotating turntable depending on the object's distance from the center of rotation or the rotational speed of the turntable.

 Equipment Location ID Number Turntable ME, Bay A9, Shelf #1 Blocks, (Stoppers) ME, Bay A9, Shelf #1

Important Setup Notes:

• N/A

Setup and Procedure:

1. Place the turntable on the lecture bench such that the table is horizontally oriented.
2. Plug in the turntable making sure the power switch is in the "off" position.
3. Turn on the turntable by flipping the switch to the "on" position.
4. Place block(s) on turn table at versus radii until it flies off.
5. Use a ceiling camera to display the turntable to the audience.

Cautions, Warnings, or Safety Concerns:

• N/A

Discussion:

When the turntable moves, the only force on the blocks allowing them to move with the turntable is friction. As per Newton's first law, the blocks, once set in motion, "want" to travel in a straight line. To alter their motion and put them into a circular trajectory, a centripetal force must act on the blocks. However, at a curtain radius (or rotational speed) the frictional force is not enough to keep the block on the turntable so the block slides off nearly talent to the rotation.

 attachment:BlockonRotatingTable-04-250.jpg attachment:BlockonRotatingTable-05-250.jpg attachment:BlockonRotatingTable-09-250.jpg attachment:BlockonRotatingTable-11-250.jpg attachment:BlockonRotatingTable-13-250.jpg

Videos:

References:

[:Instructional:Home]

fw: Block_on_a_Rotating_Table (last edited 2013-07-12 18:17:41 by localhost)